usp - easy transport wind turbine


XANT turbines are shipped in standard 40-ft containers, this dramatically reduces the transport cost and ensures parts arrive on-site undamaged. The container can be kept on-site for housing the converter and to double as a control room or battery- storage.

crane-less erection for wind turbines


XANT wind turbines can be erected without a crane, effectively halving the installation costs when compared to bringing a crane on-site. XANT tilt-up towers need only 5 smaller foundations and can even be concrete-less if cement is as hard to get by as a crane on your remote site!

easy maintain wind turbine


XANT turbines have no components requiring a lot of maintenance (gearbox, pitch system). More complex components such as the converter and control system are easily accessible at ground level. In the case of a tilt-up tower,all maintenance operations can be done on-ground.

usp - off grid systems


XANT wind turbines are designed for off-grid applications with seamless integration of the wind turbine controls in the energy management system. XANT provides optional short-term energy storage for smooth power ramps and/or integrated dump-load control.

usp - easy renewable energy


XANT wind turbines can be equipped for the harshest operating conditions: Extreme Temperature Range versions continue to operate in cold climates. XANT turbines are operated close to shore withstanding extreme wind speeds and very corrosive airs.

typhoon proof wind turbine


XANT supplies wind turbines that can withstand wind gusts up to 70m/s, equivalent to hurricane class IV wind conditions. In case of even more extreme storms, the XANT turbines with tilt-up tower can also be lowered in 1 hour time, thanks to an idiot proof lowering system.


Latest news

REIDS The Nanyang Technological University (NTU) is leading the Renewable Energy Integration Demonstrator – Singapore (REIDS) project, which will be the largest hybrid microgrid test and research platform in the tropics. XANT was selected by ENGIE Lab, one of REIDS’ partners, to supply a XANT M turbine with tilt-up tower for the Phase 1 of[…]

A few decades ago the rural electrification market was caught in a Catch-22: those with the need (for clean affordable electricity) did not have the money to pay for it, those with the money don’t want to invest in the technology, and those with the technology did not have access to those who have the[…]

Introduction The location is an island in the Atlantic Ocean and one of the more remote places on this earth. The local utility company has put out an RFP for the installation and operation of renewable power plants on the island grid. Applicants should act as Independent Power Producers (IPP) and propose a Power Purchase[…]

XANT turbines are conceived for operation in small grids. Whether called micro-grids, island grids or even off-grid, the smaller the grid the bigger the challenge to balance consumption and generation of electricity!  This is conflicting with the increasing use of renewables to power these grids. XANT turbines address this challenge without the need for adding[…]

Continued improvement in a joint effort with our component suppliers has led to significant production cost reduction of the XANT M platform. Further integration of functions, reduction of the number of bolted interfaces, de-featuring of the first generation XANT M to the essentials have made it possible to generate electricity at a Levelized Cost of[…]

When Mike Stuart decided to invest in his own on-site electricity production, XANT was the obvious choice: the strong winds in the northern tip of Scotland ask for a robust class IA turbine. Gales, often combined with heavy rains, cold spells with snowdrift: the XANT M is being put to a strenuous test.  But when[…]

The village of Pilot Point (AK, USA) has been relying upon diesel fuel for its electricity production consuming almost 1,000 barrels (120,000l) of oil per year. Average residential electricity tariffs are in the 0.35$/kWh range. Intelligent Energy Systems together with XANT will convert the existing electricity supply of the village into a hybrid system running[…]

XANT is proud to announce the shipment of another containerized XANT M turbine: a XANT M with tilt-up tower is on its way to Singapore. XANT has been selected by ENGIE Lab to provide a XANT M for their microgrid as part of the Renewable Energy Integration Demonstrator-Singapore (REIDS) project. The REIDS project, an initiative[…]

2016 has been a measly wind year: the annual wind index showed a 20% below-long-term-average value. The XANT M at the DEME Group headquarters in Zwijndrecht (BELGIUM) has made the most of it though. At an average wind speed of only 4.5m/s the turbine produced over 183MWh since its installation. At 98% availability, the XANT[…]

To exploit the full potential of midsize wind, projects need the leverage of debt financing: the sector needs to get banks in on the game to play it right! Bankability of midsize wind has always been an issue with very little technology approved by accredited bodies. XANT addresses this by subjecting the XANT M to[…]

Want to stay informed?



Choosing the turbine that’s right for you is easy as

1. Tell us where you want to put it
2. Tell us how much electricity you use
3. Tell us how much you pay for it.

The XANT turbine-selection wizard will tell you what turbine you need and how quickly it will pay for itself!


At XANT we like to stick to what we know and team up with the best for the rest. Tell us about your microgrid or off-grid project and let’s create a win-win by having permitting, balance-of-plant, installation and maintenance handled by you!
XANT is continuously looking for partners with a proven track record in wind turbine installation and maintenance.


We prefer to learn people how to fish, rather than selling them fish. Learn how to assembly, install and maintain a XANT turbine.
Register for the XANT ACADEMY and find out how easy it really is.
XANT will train you on how to install, operate and maintain your turbine at your site.

Get in touch